Want to reformulate an existing skincare product around better active delivery? A lab can rebuild it. Pensive Beauty® Nanoscience Labs reformulates conventional emulsion formulas on TDA Logic as a standard lab service. The brand keeps its actives and its product intent. The emulsifier stack and the heated phases are no longer needed, and every active is placed by its chemistry.
Most published advice on "nano-sizing" a formula assumes you keep the emulsion and push it smaller, with high-pressure homogenisation or a low-energy phase inversion method. That route keeps one interface for every ingredient. An HLB to TDA Logic conversion works differently. It does not shrink the old emulsion. It moves the formula's ingredients onto a ready tri-domain architecture, where each one is assigned to the destination its chemistry suits.
The difference
Selection rule versus placement rule
HLB, a system from 1949, is a selection rule. It helps you choose emulsifiers that will hold a given oil in water. It never asks where each active should sit once the emulsion exists. TDA Logic is a placement rule. The architecture is already built and electrostatically stabilised, so there is no emulsifier left to choose. The only question is which destination each ingredient goes to, and how much room is left there.
| HLB emulsion | Formula on TDA Logic | |
|---|---|---|
| Core question | Which emulsifier holds this oil? | Which destination suits this ingredient? |
| Interfaces | One, shared by every ingredient | Three nanoscale domains plus the water phase |
| Process | Hot oil and water phases, then cool down | Room temperature, standard lab equipment |
| Inputs | HLB values, required HLB of the oil phase | logP or logD at formula pH, solubility, charge |
| Stabilisation | Emulsifier film and viscosity | Electrostatic stabilisation designed into the architecture |
For the full background on how HLB, PIT and HLD relate to TDA Logic, the reference site is tdalogic.com.
The method
How an HLB to TDA Logic conversion works
- Inventory the formula. The brand provides its working composition: every ingredient, its level and its function. Nothing is guessed from the INCI list alone.
- Sort every ingredient by role. Each line is tagged as emulsifier system, oil or emollient, active, humectant, thickener, preservative or sensory additive. The emulsifier system is usually the first thing to go, because a TDA architecture arrives already structured and stable.
- Assign each active to a destination. Using logP or logD at the formula's pH, solubility and charge, each ingredient goes to one of four destinations: the continuous water phase, the nanoliposomal bilayer, the nanomicellar domain or the nanocolloidal oil core.
- Check the budgets. Every destination has finite room. Charged ingredients in the water phase draw on an ionic strength budget, bilayer seats are counted, and oil-core capacity is limited. The charge and salt tally is checked before anything is weighed.
- Rebuild on a ready architecture at room temperature. The formula is rebuilt on NanoBase™, a TDA architecture ready to formulate with, using standard equipment and no hot phases.
- Run bench checks. pH is read at the start and again at 24 hours, then appearance, odour and viscosity are checked. Where available, particle size is measured by dynamic light scattering (DLS).
- Hand over for finished-formula testing. The brand's own testing on the finished formula, including stability and preservative efficacy testing (PET), confirms the product before launch.
Placement
The four destinations
- Continuous water phase. Humectants, glycols and water-soluble actives such as niacinamide and many water-soluble peptides.
- Nanoliposomal bilayer. Amphiphilic ingredients that seat in a phospholipid bilayer, including lipidated peptides such as palmitoyl peptides.
- Nanomicellar domain. Surface-active and solubilised ingredients that sit within micelles.
- Nanocolloidal oil core. High-logP ingredients such as emollient oils and oil-soluble vitamins.
What changes
What usually changes, and what the brand keeps
What usually drops out:
- The emulsifier stack and co-emulsifiers chosen by HLB.
- The heated oil and water phases, and the cool-down step.
- Some texture builders that only existed to hold the old emulsion together.
What may need rethinking:
- Melt-only waxes and butters, which need heat to incorporate. Some lip, wax and butter formats may still need a heated step.
- Very high salt or electrolyte loads, which compete with the architecture's electrostatic stabilisation.
- Salt-form preservatives such as benzoates and sorbates, which are not recommended because they draw on the ionic budget. NanoBase™ is preserved by design for the downstream formula, so many converted formulas need no added preservative, with PET recommended on the finished product.
What the brand keeps:
- Its actives and the levels it chose for them, subject to the budget check.
- Its product intent: format, texture direction, sensory profile and the claims it plans to substantiate.
- Ownership of the finished formula. Claims always belong to the finished formula, so the brand's own testing on that formula is what supports them.
Working with the lab
Ways to convert a formula with Pensive Beauty® Nanoscience Labs
Formulas built on TDA Logic have been in commercial production since 2025, filled and sold today. There are three ways to take part:
- Conversion as a lab service. The lab converts the brand's existing HLB formula to TDA Logic under NDA and returns the rebuilt formula and its SOP. The lab is R&D only: the finished formula is made by the qualified contract manufacturer of the brand's choice, and the lab supplies NanoBase™ to that manufacturer. The client can own the IP on its finished formula.
- Formulate in house. Companies with their own lab can buy NanoBase™ and do the conversion themselves. The free public tool at api.nanobaselabs.com checks placement and loading as you build.
- Start with a free formula design. Qualifying new brands can request a free formula design: the formula blueprint on paper is free, and bench development is quoted in writing before any work begins.
The method in this article is covered in depth, with a step by step HLB conversion and a conversion checklist, in the book Formulating Beyond HLB.
Frequently asked questions
How do I reformulate a skincare product?
Start from the working formula. A lab inventories every ingredient by role, decides where each active belongs by its chemistry, checks the salt and charge budget, then rebuilds the formula and runs bench checks. On a ready TDA architecture the rebuild is done at room temperature, and the brand can own the finished formula.
Can a lab convert my existing emulsion formula to a nano delivery system?
Yes. Pensive Beauty® Nanoscience Labs converts HLB emulsion formulas to TDA Logic as a lab service. Instead of shrinking the old emulsion, each ingredient is reassigned to one of four destinations on a ready tri-domain architecture and the formula is rebuilt at room temperature.
Do I need high-pressure homogenisation to convert my formula?
No. The nanoscale structure is already built into the TDA architecture, so the converted formula is made at room temperature with standard lab and manufacturing equipment. That also means any qualified contract manufacturer can make it.
What happens to the emulsifiers in my current formula?
They are usually removed. A TDA architecture arrives structured and electrostatically stabilised, so there is no emulsifier left to choose. The ingredients that did real work in the formula, such as actives, humectants and emollients, are kept and placed by their chemistry.
Who owns the converted formula?
The client can own the IP on its finished formula. The TDA architecture itself remains Pensive Beauty® Nanoscience Labs' design, and the finished formula can be made by the contract manufacturer of the client's choice.
Can every formula be converted to TDA Logic?
Most leave-on serums, gels, lotions and creams can. Formats that depend on melt-only waxes or butters, or that carry very high salt loads, may need rethinking or a heated step, and the lab will say so when it reviews the formula.

