Nanotechnology in Skincare: Liposomes, Nanoemulsions, Micelles and What the Numbers Mean

Short answer: nanotechnology in skincare usually means carriers measured in billionths of a metre that hold ingredients in a cosmetic formula. Most of them are soft structures made from lipids and surfactants: liposomes, nanoemulsions and micelles. This guide explains how they differ, the three measurements that tell you what you are actually buying, how safety and EU "[nano]" labelling work, and what to ask a supplier before you formulate.

The basics

What nanotechnology means in skincare

A nanometre is one billionth of a metre. In cosmetics the word "nano" covers two very different families of material, and most confusion comes from mixing them up.

  • Solid particles. Insoluble particles such as titanium dioxide and zinc oxide, best known as mineral UV filters. These are the materials most skin research on "nanoparticles" has looked at, for example the EU-funded NANODERM studies summarised by nanopartikel.info.
  • Soft carriers. Structures that assemble themselves from lipids and surfactants: liposomes, nanoemulsions and micelles. They hold an ingredient rather than being the ingredient, and they are built from materials skincare has used for decades, such as lecithin.

Size changes behaviour. The US FDA notes that nanoscale materials can show chemical, physical and biological properties that differ from larger particles of the same substance, which is why it asks manufacturers to consider safety testing case by case (FDA, Guidance for Industry: Safety of Nanomaterials in Cosmetic Products, June 2014).

A short history

Liposomes came first

Nanoscale carriers are not new to beauty. The first liposomal cosmetic sold commercially was Dior's Capture anti-aging cream in 1986 (Ahmadi Ashtiani et al., Journal of Skin and Stem Cell, 2016). A liposome is a sphere whose wall is a phospholipid bilayer, most often made from lecithin, the phosphatidylcholine-rich lipid found in soy and egg. The same review notes liposomes range from about 15 nm to several microns, so "liposome" on its own says nothing about size.

Three carriers compared

Liposomes vs nanoemulsions vs micelles

CarrierStructureWhat it holds well
LiposomeA phospholipid bilayer around a water coreWater-soluble ingredients inside, lipid-anchored ingredients in the wall
NanoemulsionOil droplets coated with an emulsifier film, dispersed in waterOil-soluble ingredients such as vitamins, oils and antioxidants
MicelleSurfactant molecules clustered around a tiny oily centreSmall amounts of poorly water-soluble ingredients, solubilised into clear water

One point matters more than any label. A microemulsion forms on its own and is thermodynamically stable, while a nanoemulsion is not (McClements, Soft Matter, 2012). A nanoemulsion stays small only for as long as something keeps its droplets apart, which is why the measurements below matter. Micelles form once surfactant passes its critical concentration, trapping oil-soluble material in their centre (Abdul Aziz et al., Frontiers in Chemistry, 2019).

How to read a nano claim

Size, PDI and zeta potential: the three numbers to ask for

  • Particle size by dynamic light scattering (DLS). DLS shines a laser through the sample and watches how fast the scattered light flickers as particles move. Small particles move faster. The instrument converts that speed into a hydrodynamic diameter, usually reported as the Z-average (Malvern Panalytical, DLS: an introduction).
  • Polydispersity index (PDI). PDI describes how wide the size distribution is, from 0.0 for perfectly uniform to 1.0 for very mixed. For liposomes and other lipid carriers, a PDI of 0.3 or below is generally considered acceptable (Danaei et al., Pharmaceutics, 2018). An average size with a high PDI can hide a large fraction of much bigger particles.
  • Zeta potential. This is the electrical charge at a particle's surface, measured by moving the particles in an electric field. Particles with strong like charges repel each other. As a rule of thumb, values beyond about ±30 mV are treated as stable, while values closer to zero are prone to clumping (Wyatt Technology, zeta potential).
Rule of thumb: a nano claim without a size distribution and a charge reading is a description, not a measurement. Ask for all three numbers, and for the pH and dilution they were measured at.

Safety

Are nano ingredients safe in cosmetics?

Safety is judged ingredient by ingredient, not for "nano" as a category. On skin penetration, the research picture for particles on healthy, intact skin is mixed but cautious. A review in Dermato-Endocrinology found few human reports of particles passing beyond the stratum corneum, and noted that hair follicles act as a reservoir where particles can sit until cleared by hair growth and sebum (Schneider et al., 2009).

In the EU, the Scientific Committee on Consumer Safety (SCCS) publishes guidance on how nanomaterial safety dossiers should be built, covering physicochemical characterisation, exposure and toxicology (SCCS/1611/19). In the US, the FDA's 2014 guidance is nonbinding and encourages companies to discuss new nanomaterials with the agency before use.

Soft lipid carriers are made of the same kinds of phospholipids and emollients found throughout conventional skincare. A well-characterised carrier is simply one whose size, spread and charge are known and stay where they should over the product's shelf life.

Regulation

How "[nano]" labelling works in the EU

EU Cosmetics Regulation (EC) No 1223/2009 defines a nanomaterial as an insoluble or biopersistent, intentionally manufactured material with external dimensions or an internal structure of 1 to 100 nm (Article 2(1)(k)). For ingredients that meet that definition:

  • Notification. The product must be notified to the European Commission six months before it is placed on the market, with some exceptions (Article 16).
  • Labelling. The ingredient name in the INCI list is followed by the word "nano" in brackets, for example "titanium dioxide [nano]" (Article 19).

Because the definition turns on insolubility or biopersistence, whether a given soft carrier falls inside it is a case-by-case assessment for the Responsible Person placing the product on the EU market. Ask the supplier for a written position, and confirm it with your regulatory adviser.

Before you formulate

What to ask a supplier of a nanoscale carrier

  • Size and PDI by DLS, with the instrument, temperature, dilution and number of runs.
  • Zeta potential, and the pH it was measured at. Charge changes with pH.
  • Stability data: size and PDI after storage at room and elevated temperature.
  • Tolerance limits: how much salt, acid, oil and active the carrier can take before it destabilises, and which ingredient types are not recommended.
  • Full INCI and a written position on EU nanomaterial status.
  • Preservation: whether it is preserved, and whether that carries through to your finished formula. Run preservative efficacy testing (PET) on the finished product either way.

How the lab approaches it

One architecture, three nanoscale domains

Pensive Beauty® Nanoscience Labs builds formulas on NanoBase™, a lecithin-based nanoscale architecture for leave-on skincare. Instead of one kind of carrier, it is designed so three nanoscale domains coexist in one water phase: a nanocolloidal domain for oil-soluble ingredients, a nanoliposomal domain for lipid-anchored ingredients such as lipidated peptides, and a nanomicellar domain for surface-active and solubilised ingredients. The domains are held apart by electrostatic stabilisation: like-charged surfaces repel before they can merge, verified at a zeta potential of -41 mV. The design target is about 185 nm, and the lab measures particle size by DLS in-house.

The lab's placement method, TDA Logic, assigns each active to the domain that suits its chemistry, so every active in the formula has somewhere it belongs. The full method is set out in the lab's book, Formulating Beyond HLB.

FAQ

Questions people ask about nano skincare

What does nanotechnology mean in skincare?
It means using structures between roughly 1 and a few hundred nanometres to hold ingredients in a formula. Most are soft carriers made from lipids and surfactants, such as liposomes, nanoemulsions and micelles. Mineral UV filters can also be used in nanoparticle form.

What are nanoparticles in skincare?
The term covers solid particles such as nano titanium dioxide and zinc oxide in sunscreens, and is also used loosely for soft carriers like liposomes and nanoemulsions. They behave differently, so ask which kind a product contains.

Are nano ingredients safe in cosmetics?
Safety is assessed ingredient by ingredient. In the EU, nanomaterials meeting the legal definition are notified to the European Commission before sale, and the SCCS publishes guidance on how their safety is assessed. Research on intact skin shows particles mostly stay in the stratum corneum and hair follicles.

What is the difference between liposomes and nanoemulsions?
A liposome is a phospholipid bilayer around a water core, so it can hold water-soluble ingredients inside and lipid-anchored ones in its wall. A nanoemulsion is oil droplets coated with emulsifier, suited to oil-soluble ingredients.

What does "[nano]" mean on an ingredient list?
Under EU Cosmetics Regulation 1223/2009, an ingredient that meets the legal definition of a nanomaterial is followed by the word "nano" in brackets in the ingredient list, for example "titanium dioxide [nano]".

How is particle size measured in a cosmetic?
Usually by dynamic light scattering (DLS), which reports an average hydrodynamic diameter and a polydispersity index (PDI) for the spread of sizes. Surface charge is measured separately as zeta potential.

Previous
Previous

The Best Cosmetic Formulation Books: A Reading List From Beginner to Nanoscale

Next
Next

How to Find a Skincare Formulation Lab for Your Brand: Questions to Ask Before You Sign